STEP1
先設好TFTP server IP 準備好 firmware
STEP2
連接fortigate console 到電腦or NB 的COM port
開啟超級終端機，設定如下
STEP3
開啟Fortigate電源
Ver:04xxxxx6
Serial number: FGXXXXXXXX74
RAM activation
Total RAM: XXXMB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Enabling Interrupts...Done.
Boot up, boot device capacity: XXXMB.
Press any key to display configuration menu...[這邊要按任意鍵]
...
[G]: Get firmware image from TFTP server.
[F]: Format boot device.
[I]: Configuration and information.
[Q]: Quit menu and continue to boot with default firmware.
[H]: Display this list of options.
Enter Selection [G]: [這邊要按G鍵]
Enter G,F,I,Q,or H:
Please connect TFTP server to Ethernet port "X".[網路線一端接port X 另一端接到tftp server]
Enter TFTP server address [192.168.1.168]: 192.168.1.168 [tftp server IP位置]
Enter local address [192.168.1.188]: 192.168.1.188 [給Fortigate同網段的IP]
Enter firmware image file name [image.out]: XXX.out [這邊要輸入firmware檔案名稱]
MAC:00090FXXXXXX
################ [這邊出現### 代表再傳送firmware檔案]
Total 16983882 bytes data downloaded.
Verifying the integrity of the firmware image.
Total 28016kB unzipped.
Save as Default firmware/Run image without saving:[D/R]?D [這邊要選擇D 讓firmware 作為預設開機]
Programming the boot device now. [完成，重開機]
...........................
Initializing firewall...
System is started.
FGXXXXXXXX74 login: admin [login ID admin]
Password: [password 空白]
Welcome !
FGXXXXXXXX74 # [Done]
