Fortigate firmware upload

STEP1

先設好TFTP server IP 準備好 firmware

STEP2

連接fortigate console 到電腦or NB 的COM port

開啟超級終端機，設定如下

STEP3

開啟Fortigate電源

Ver:04xxxxx6

Serial number: FGXXXXXXXX74

RAM activation

Total RAM: XXXMB

Enabling cache...Done.

Scanning PCI bus...Done.

Allocating PCI resources...Done.

Enabling PCI resources...Done.

Zeroing IRQ settings...Done.

Verifying PIRQ tables...Done.

Enabling Interrupts...Done.

Boot up, boot device capacity: XXXMB.

Press any key to display configuration menu...[這邊要按任意鍵]

...

[G]: Get firmware image from TFTP server.

[F]: Format boot device.

[I]: Configuration and information.

[Q]: Quit menu and continue to boot with default firmware.

[H]: Display this list of options.

Enter Selection [G]: [這邊要按G鍵]

Enter G,F,I,Q,or H:

Please connect TFTP server to Ethernet port "X".[網路線一端接port X 另一端接到tftp server]

Enter TFTP server address [192.168.1.168]: 192.168.1.168 [tftp server IP位置]

Enter local address [192.168.1.188]: 192.168.1.188 [給Fortigate同網段的IP]

Enter firmware image file name [image.out]: XXX.out [這邊要輸入firmware檔案名稱]

MAC:00090FXXXXXX

################ [這邊出現### 代表再傳送firmware檔案]

Total 16983882 bytes data downloaded.

Verifying the integrity of the firmware image.

Total 28016kB unzipped.

Save as Default firmware/Run image without saving:[D/R]?D [這邊要選擇D 讓firmware 作為預設開機]

Programming the boot device now. [完成，重開機]

...........................

Reading boot image 1346832 bytes.

Initializing firewall...

System is started.

FGXXXXXXXX74 login: admin [login ID admin]

Password: [password 空白]

Welcome !

FGXXXXXXXX74 # [Done]